Performance with energy efficiency

The Classic+ is the next generation of fast drying energy-efficient dryers designed with the environment in mind.

The Classic+ is a hand dryer with exceptional drying performance coupled with the lowest noise levels in its class. The ultimate in modern, efficient washroom hand dryers, the Classic+ is perfect for all high traffic applications.

Installation

The installation of the drier is extremely straightforward provided an electrical point is available.

• The drier should be positioned on the wall at a height of approximately 1.22 metres (4 ft) measured from the base of the unit to the floor.
• Remove cover by removing single cross head screw at the bottom of the drier. Mark and drill holes to the positions shown on the template provided, to suit wall plugs for No 10 x 2 1/2 & long screws and insert wall plugs.
• Make provision for electrical connection using supply cable suitable for 10 amps at 240 volts. A fused double pole isolating switch must be provided adjacent to the drier to permit complete isolation of the unit during servicing.

Servicing

The amount of servicing and maintenance required is minimal and consists of cleaning and inspection checks at six monthly intervals. The unit is backed by a 12 month guarantee and an efficient after sales spares service. Normally replacements or spares are available on a 24 hour turn around.

In pursuance of a policy of continued improvement, the manufacturers reserve the right to make alterations without notice.

Classic+ is a GreenSpec
listed product.